Question: Does R Go To RC Or RH?

Why is there a jumper between RH and RC?

Effectively there isn’t a second RH wire, although there is an RH terminal.

However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat..

What color is RC wire on thermostat?

RedThermostat Wiring Color Code ChartMarkingWire Color CodeDescriptionRcRedPower from cooling, 24 Vac transformerRhRedPower from heat, 24 Vac transformerCBlack/BlueCommon of 24 Vac transformerWWhitePrimary heat cell relay12 more rows

Where does RC wire go on nest?

Note: If you have an R, Rc or Rh wire, you can put it into the R connector on the Nest Thermostat. If you have a W2, Y2 or O/B wire, you can put it into the * O/B connector, if needed.

What is RC and RH on thermostat?

RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system, but not in a five-wire heating/cooling system.)

What is an R wire?

The R wire is the power wire for your heating and cooling system. If you only have one R wire (no Rh or Rc), you can connect your R wire to. either Rc or Rh on the Nest thermostat.

Does red wire go to RC or RH?

The RED wire or 24 Vac power lead is connected straight to the RC & 4 terminals. Some thermostat units have a dedicated R terminal and it jumpers to the RC, RH or 4 terminals internally. The W, Y and G terminals should be pretty straight forward on most all types of thermostat’s.

What does R mean on a thermostat?

If, for example, you have an R wire and an Rc wire, the R wire controls the heating system. … Y, Y1, Y2: Whenever your thermostat calls for cooling, the Y wire is used to send a signal to your HVAC system telling it to fire up the air conditioner.

Is RC the same as C wire?

Though it is a common notion, it may be incorrect to state that the C-wire powers the thermostat. Typically, the wires that give the power supply (usually termed as the ‘hot’ wires) are marked Rc (for cooling) and Rh (for heating). … ‘ If your system has a common wire, it will be marked ‘C’ at most times.

Do I need a jumper from R to RC?

If you notice a short jumper wire between RH and RC terminal, you will need to leave the jumper installed on the Wiser Air back plate located in the lower right hand corner ( no jumper wire required). In most cases, the heating and cooling system share a single transformer.

Does Honeywell t9 need C wire?

The T9 requires a C-Wire which is common in most newer homes. On Honeywell Home’s site, there is a compatibility checker for you to see if the Honeywell Home T9 will work with your home’s system. … You need to go to your boiler or AC unit and locate the wiring. On most HVAC systems, the wires are labeled.

What color is the C wire?

BlueThese are the most common colors and the labels used for thermostat wires: Blue or Black – C – The common wire. Red – R – 24 VAC power from the transformer in your furnace.

What if there is no C wire for thermostat?

If your current thermostat didn’t need a C-wire, it (or a wire that can be used as a C-wire) might be rolled up inside the wall.

Is Rh the same as R on thermostat?

R , Rh , and Rc are all the same, but not. In general terms, the R terminal is where you connect the signal voltage source. … This allows current to flow from “into” the R terminal and “out of” the appropriate signal terminal ( W , Y , etc.) of the thermostat.

What is blue wire thermostat?

Blue wires are also called “C” wires because they are the Common wire. C wires are necessary for any “smart” thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type. … Blue wires are for heat pumps, like orange wires. This wire connects to terminal B on your thermostat.

Should RC and RH be connected?

The RC wire (C for Cooling), if connected properly, controls your HVAC cooling. The RH wire (H for Heating) provides power to your HVAC heating. If you are planning to replace your home thermostat, it will be essential that you know which wires to connect to the right terminals in your thermostat.