Why Is My Printer Not Printing When It Has Ink?

Why is my HP printer printing blank pages when it has ink?

When your printer suddenly starts printing blank pages, you may immediately think that you’ve run out of ink.

The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles.

Driver and software issues can sometimes cause this problem as well..

How do I fix my printer not printing black ink?

My Printer Won’t Print in Black: What Should I Do?Turn off your printer, unplug from the power source and disconnect USB cables as well. … Print a “Quality Diagnostic Report” or a “Print Test Page”.You can usually find this option on your printer’s display screen. … Check printer ink levels to double check the ink volume in your cartridges.

How do you reset your printer?

Power the printer off completely.While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.Allow the printer to warm up as normal.

How do I fix my HP printer that won’t print?

Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.

How do I fix an incompatible HP ink cartridge?

How do you bypass an incompatible HP ink cartridge?Remove all of the cartridges from the printer.Place the incompatible ink cartridge back in the printer.Power off the printer and unplug its power cord from the wall– wait 10-15 minutes.Plug the power cord back in and power on the printer.Insert the next incompatible ink cartridge, one at a time.More items…•

Is there a reset button on HP printers?

The control panel will display SELECT LANGUAGE. Press (Down Arrow) button until control panel displays COLD RESET. Press (Select). The printer will perform a cold reset and then continue its power-on sequence.

Why won’t my printer read my ink?

Ink cartridges that have been refilled can damage the integrity of the ink cartridge which can sometimes cause leaks in your printer. The manufacturers chip would also need to be reset as the printer may read the chip and think that it is empty. … If this isn’t done, then the printer will fail to recognise the cartridge.

Why is my printer not printing even though it has ink?

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. … Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

Why won’t my HP printer print after I changed the ink?

Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. Check your printer for a “Cleaning” button and press it or hold it down for a few seconds. … After running the cleaning cycle, print a test page to determine whether the printer can print again.

What is the problem if the printer doesn’t print?

Right-click your printer and select Properties. Then in the General tab click on the Print Test Page button. If you are unable to print a test page after following the previous steps, you may want to restart your computer. Restarting fixes many hardware problems.

How do I reset the ink on my HP printer?

How to Reset Ink Levels on an HP CartridgeLocate and take out both the black and the color ink HP cartridges from your printer.Press the “On” button on your printer to turn it on, wait 20 seconds, then turn it off. Allow the printer to completely turn off. … Replace the black and the color HP cartridges inside the printer.

How do I fix the color problem on my HP printer?

Change the color optionsFrom the software program, select the Print option.Select the product, and then click the Properties or Preferences button.Click the Paper/Quality tab.In the Color section, select Black & White or Color. note: … Click the OK button to close the Document Properties dialog box.

Why does my HP printer say there’s no ink?

First of all, the cartridge is not installed properly. When you install the new ink cartridge, make sure the protective tape is removed. The tape usually covers the ink port and electrical contacts of the cartridge. … The empty ink cartridge message may show up on the printer’s display or on the computer.

How do you troubleshoot a printer?

Printer Troubleshooting BasicsCheck the power. Make sure your printer is turned on and has power.Check the paper. Make sure you have paper in the paper tray. … Check the connection. Check that the cable (probably USB) connecting the printer to your Mac or router is plugged into its appropriate port. … Check what’s selected. … Check for ink issues.